ZyXEL NWA3000-N User Manual Page 85

  • Download
  • Add to my manuals
  • Print
  • Page
    / 386
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 84
Chapter 6 Monitor
NWA3000-N Series User’s Guide
85
Name This field displays the name of the interface.
Status This field displays the current status of the interface:
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected.
This field displays the port speed and duplex setting (Full or Half).
HA Status This is available when the NWA3000-N series AP is in controller mode.
This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right now.
For example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
VID This field displays the VLAN ID to which the interface belongs.
IP Addr/
Netmask
This field displays the current IP address and subnet mask assigned to
the interface. If the IP address and subnet mask are 0.0.0.0, the
interface is disabled or did not receive an IP address and subnet mask
via DHCP.
If this interface is a member of an active virtual router, this field displays
the IP address it is currently using. This is either the static IP address of
the interface (if it is the master) or the management IP address (if it is a
backup).
IP Assignment This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Action Use this field to get or to update the IP address for the interface. Click
Renew to send a new DHCP request to a DHCP server. Click Connect to
try to connect the interface. If the interface cannot use one of these
ways to get or to update its IP address, this field displays n/a.
Port Statistics
Table
Switch to
Graphic View
Click this to display the port statistics as a line graph.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the
port speed and duplex setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the
NWA3000-N series AP on the physical port since it was last connected.
RxPkts This field displays the number of packets received by the NWA3000-N
series AP on the physical port since it was last connected.
Table 20 Monitor > LAN Status (continued)
LABEL DESCRIPTION
Page view 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 385 386

Comments to this Manuals

No comments