ZyXEL NWA3000-N User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 386
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
Chapter 5 Dashboard
NWA3000-N Series User’s Guide
79
Name This field displays the name of each interface.
Status This field displays the current status of each interface. The possible
values depend on what type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected.
This field displays the port speed and duplex setting (Full or Half).
VID This field displays the VLAN ID to which the interface belongs.
HA Status This displays when the NWA3000-N series AP is in controller mode.
This field displays the status of the interface in the virtual router.
Active - This interface is the master interface in the virtual router.
Stand-By - This interface is a backup interface in the virtual router.
Fault - This VRRP group is not functioning in the virtual router right
now. For example, this might happen if the interface is down.
n/a - Device HA is not active on the interface.
IP Addr/
Netmask
This field displays the current IP address and subnet mask assigned
to the interface. If the IP address is 0.0.0.0, the interface is disabled
or did not receive an IP address and subnet mask via DHCP.
If this interface is a member of an active virtual router, this field
displays the IP address it is currently using. This is either the static IP
address of the interface (if it is the master) or the management IP
address (if it is a backup).
IP Assignment This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Action Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
Top 5 Station When the NWA3000-N series AP is in controller mode this displays the
top 5 Access Points (AP) with the highest number of station (aka
wireless client) connections during the past 24 hours.
# This field displays the rank of the station.
AP MAC This field displays the MAC address of the AP to which the station
belongs.
Max. Station
Count
This field displays the maximum number of wireless clients that have
connected to this AP.
AP Description This displays the description of the AP to which the radio belongs.
WLAN Interface
Status Summary
When the NWA3000-N series AP is in standalone mode this displays
status information for the WLAN interface.
Status This displays whether or not the WLAN interface is activated.
MAC Address This displays the MAC address of the radio.
Table 17 Dashboard (continued)
LABEL DESCRIPTION
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 385 386

Comments to this Manuals

No comments