ZyXEL NWA3000-N User Manual Page 160

  • Download
  • Add to my manuals
  • Print
  • Page
    / 386
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 159
Chapter 12 AP Profile
NWA3000-N Series User’s Guide
160
Primary /
Secondary
Accounting
Server Activate
Select the check box to enable user accounting through an external
authentication server.
Accounting
Server IP
Address
Enter the IP address of the external accounting server in dotted
decimal notation.
Accounting
Server Port
Enter the port number of the external accounting server. The default
port number is 1813. You need not change this value unless your
network administrator instructs you to do so with additional
information.
Accounting
Share Secret
Enter a password (up to 128 alphanumeric characters) as the key to
be shared between the external accounting server and the NWA3000-
N series AP. The key must be the same on the external accounting
server and your NWA3000-N series AP. The key is not sent over the
network.
Reauthentication
Timer
Enter the interval (in seconds) between authentication requests. Enter
a 0 for unlimited requests.
Idle Timeout Enter the idle interval (in seconds) that a client can be idle before
authentication is discontinued.
Authentication
Type
Select a WEP authentication method. Choices are Open or Share key.
Share key is only available if you are not using 802.1x.
Key Length Select the bit-length of the encryption key to be used in WEP
connections.
If you select WEP-64:
Enter 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(for example, 0x11AA22BB33) for each Key used.
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z
and “0-9” (for example, MyKey) for each Key used.
If you select WEP-128:
Enter 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(for example, 0x00112233445566778899AABBCC) for each Key
used.
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-
Z” and “0-9” (for example, MyKey12345678) for each Key used.
Key 1~4 Based on your Key Length selection, enter the appropriate length
hexadecimal or ASCII key.
PSK Select this option to use a Pre-Shared Key with WPA encryption.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII
characters (including spaces and symbols) or 64 hexadecimal
characters.
Table 57 SSID > Security Profile > Add/Edit Security Profile (continued)
LABEL DESCRIPTION
Page view 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 385 386

Comments to this Manuals

No comments