ZyXEL NWA3000-N User Manual download pdf (Page 109)

Chapter 8 LAN Setting

NWA3000-N Series User’s Guide

109

Each field is described in the following table.

Table 34 Configuration > LAN Setting

LABEL DESCRIPTION

IP Address

Assignment

Get

Automatically

This option appears when the MGNT Mode is set to Stand Alone AP.

Select this to make the interface a DHCP client and automatically get

the IP address, subnet mask, and gateway address from a DHCP

server.

Use Fixed IP

Address

Select this if you want to specify the IP address, subnet mask, and

gateway manually. You can only configure a fixed IP address when the

MGNT Mode is set to Stand Alone AP.

IP Address Enter the IP address for this interface.

Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The

subnet mask indicates what part of the IP address is the same for all

computers in the network.

Gateway Enter the IP address of the gateway. The NWA3000-N series AP sends

packets to the gateway when it does not know how to route the

packet to its destination. The gateway should be on the same network

as the interface.

DNS Server

Settings

Use this section to specify the IP addresses for the NWA3000-N series

AP to use. Use one of the following ways to specify these IP

addresses.

User-Defined - enter a static IP address.

From ISP - select the DNS server that another interface received

from its DHCP server.

Add Click this to create a new entry. Select an entry and click Add to

create a new entry after the selected entry.

Edit Double-click an entry or select it and click Edit to be able to modify

the entry’s settings.

Remove To remove an entry, select it and click Remove. The NWA3000-N

series AP confirms you want to remove it before doing so. Note that

subsequent entries move up by one when you take this action.

Move To change an entry’s position in the numbered list, select the entry

and click Move to display a field to type a number for where you want

to put it and press [ENTER] to move the rule to the number that you

typed.

# This is the index number of the DNS server address entry. The

ordering of your entries is important as the NWA3000-N series AP

uses them in sequence.

A hyphen (-) displays for the default DNS server address entry. The

NWA3000-N series AP uses this default entry if it cannot get a reply

for any of the other servers.

Type This displays whether the DNS server IP address is assigned by a

DHCP server dynamically (From DHCP), is configured manually

(User-Defined), or is the default entry the NWA3000-N series AP

uses if it cannot get a reply for any of the other servers.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 385 386

Comments to this Manuals

No comments

ZyXEL NWA3000-N User Manual Page 109

Comments to this Manuals

Related products and manuals for Routers ZyXEL NWA3000-N