ZyXEL NWA3000-N User Manual download pdf (Page 133)

Chapter 10 Device HA

NWA3000-N Series User’s Guide

133

Monitored

Interface

Summary

This table shows the status of the device HA settings and status of the

NWA3000-N series AP’s interfaces.

Edit Select an entry and click this to be able to modify it.

Activate To turn on an entry, select it and click Activate.

Inactivate To turn off an entry, select it and click Inactivate.

# This is the entry’s index number in the list.

Status The activate (light bulb) icon is lit when the entry is active and dimmed

when the entry is inactive.

Interface This field identifies the interface. At the time of writing, Ethernet and

bridge interfaces can be included in the active-passive mode virtual

router. The member interfaces of any bridge interfaces do not display

separately.

Virtual Router

IP / Netmask

This is the master NWA3000-N series AP’s (static) IP address and

subnet mask for this interface. If a backup takes over for the master, it

uses this IP address. These fields are blank if the interface is a DHCP

client or has no IP settings.

Management IP

/ Netmask

This field displays the interface’s management IP address and subnet

mask. You can use this IP address and subnet mask to access the

NWA3000-N series AP whether it is in master or backup mode.

Link Status This tells whether the monitored interface’s connection is down or up.

Synchronization Use synchronization to have a backup NWA3000-N series AP copy the

master NWA3000-N series AP’s configuration and certificates.

Every interface’s management IP address must be in the same subnet

as the interface’s IP address (the virtual router IP address).

Server Address If this NWA3000-N series AP is set to backup role, enter the IP address

or Fully-Qualified Domain Name (FQDN) of the NWA3000-N series AP

from which to get updated configuration. Usually, you should enter the

IP address or FQDN of a virtual router on a secure network.

If this NWA3000-N series AP is set to master role, this field displays the

NWA3000-N series AP’s IP addresses and/or Fully-Qualified Domain

Names (FQDN) through which NWA3000-N series APs in backup role

can get updated configuration from this NWA3000-N series AP.

Sync. Now Click this to copy the specified NWA3000-N series AP’s configuration.

Server Port If this NWA3000-N series AP is set to backup role, enter the port

number to use for Secure FTP when synchronizing with the specified

master NWA3000-N series AP.

If this NWA3000-N series AP is set to master role, this field displays the

NWA3000-N series AP’s Secure FTP port number. Click the link if you

need to change the FTP port number.

Every NWA3000-N series AP in the virtual router must use the same

port number. If the master NWA3000-N series AP changes, you have to

manually change this port number in the backups.

Table 45 Configuration > Device HA > Active-Passive Mode (continued)

LABEL DESCRIPTION

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 385 386

Comments to this Manuals

No comments

ZyXEL NWA3000-N User Manual Page 133

Comments to this Manuals

Related products and manuals for Routers ZyXEL NWA3000-N