ZyXEL NWA3000-N User Manual Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 386
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
Chapter 7 Management Mode
NWA3000-N Series User’s Guide
106
Note: After you change the operation mode, the NWA3000-N series AP resets to its
default settings for the mode you set it to, including the IP address of
192.168.1.2. It also backs up its configuration to a xxx-backup.conf file where
xxx denotes the mode the NWA3000-N series AP was previously using.
Click Configuration > MGNT MODE in the NWA3000-N series AP’s navigation
menu. The following screen displays.
Figure 40 Configuration > MGNT MODE
The following table describes the labels in this screen.
Table 33 Configuration > MGNT MODE
LABEL DESCRIPTION
AP Controller Select this option to have the NWA3000-N series AP act as a
managing device for other NWA3000-N series APs on your
network. The NWA3000-N series AP only acts as a controller
when you select this. Wireless clients cannot connect directly to
the controller; you have to connect to it through the wired
network.
Standalone AP Select this to manage the NWA3000-N series AP using its own
web configurator, neither managing nor managed by other
devices.
Managed AP Select this to have the NWA3000-N series AP managed by
another NWA3000-N series AP on your network.
When you do this, the NWA3000-N series AP can be configured
ONLY by the management AP. If you do not have an AP controller
on your network and want to return the NWA3000-N series AP to
standalone mode, you must use the its physical RESET button or
the commands. All settings are returned to their default values.
Apply Click this to save your changes.
If you change the mode in this screen, the NWA3000-N series AP
restarts. Wait a short while before you attempt to log in again. If
you changed the mode to Managed AP, you cannot log in as the
web configurator is disabled; you must manage the NWA3000-N
series AP through the controller AP on your network.
Reset Click this to return this screen to its previously-saved settings.
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 385 386

Comments to this Manuals

No comments