Chapter 4 Tutorials
NWA3000-N Series User’s Guide
58
1 Open the controller’s Configuration > LAN Setting screen.
• IP Address: Enter 10.10.99.10.
• Subnet Mask: Enter 255.255.255.0.
• Gateway: Enter 10.10.99.10.
• Management VLAN ID: Enter ‘99’ as the VLAN ID tag.
•Click Apply to save these changes.
2 Configure your DHCP server with the controller’s IP address configured as option
138 so the managed NWA3000-N series APs can get the controller’s IP address
from it. See Chapter 7 on page 103 for details.
4.1.3 Set Up Wireless User Authentication
This section shows you how to set up the controller’s internal RADIUS server and
user accounts.
Note: If you did not replace the factory default certificate with one that uses your
NWA3000-N series AP's MAC address when you first logged into the
NWA3000-N series AP, do it now in the Object > Certificate > My Certificates
screen.
Comments to this Manuals