ZyXEL NWA3000-N User Manual download pdf (Page 111)

NWA3000-N Series User’s Guide

111

CHAPTER 9

Wireless

9.1 Overview

Use the Wireless screens to configure how the NWA3000-N series AP manages

the Access Point that are connected to it.

9.1.1 What You Can Do in this Chapter

•The Controller screen (Section 9.2 on page 112) sets how the NWA3000-N

series AP allows new APs to connect to the network. This is available when the

NWA3000-N series AP is in controller mode.

•The AP Management screen (Section 9.3 on page 113) manages the

NWA3000-N series AP’s general wireless settings if it is in standalone mode or

the general wireless settings of all of the NWA3000-N series AP‘s managed APs

if the NWA3000-N series AP is in controller mode.

•The MON Mode screen (Section 9.4 on page 116) allows you to assign APs

either to the rogue AP list or the friendly AP list.

•The Load Balancing screen (Section 9.5 on page 119) configures network

traffic load balancing between the APs and the NWA3000-N series AP.

•The DCS screen (Section 9.6 on page 122) configures dynamic radio channel

selection.

9.1.2 What You Need to Know

The following terms and concepts may help as you read this chapter.

Station / Wireless Client

A station or wireless client is any wireless-capable device that can connect to an

AP using a wireless signal.

Dynamic Channel Selection (DCS)

Dynamic Channel Selection (DCS) is a feature that allows an AP to automatically

select the radio channel upon which it broadcasts by scanning the area around it

and determining what channels are currently being used by other devices.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 385 386

No comments

ZyXEL NWA3000-N User Manual Page 111