ZyXEL NWA3000-N User Manual download pdf (Page 110)

Chapter 8 LAN Setting

NWA3000-N Series User’s Guide

110

8.2.1 Add or Edit a DNS Setting

Use this screen to configure a DNS server entry for the LAN. Click Configuration

> LAN Setting and then click the Add button or select a DNS server entry from

the list and click the Edit button to access this screen.

Figure 42 Configuration > LAN Setting > Add

The following table describes the labels in this screen.

DNS Server This is the IP address of a DNS server. This field displays N/A if you

have the NWA3000-N series AP get a DNS server IP address from the

ISP dynamically but the LAN interface is using a static IP address.

VLAN Settings

Management

VLAN ID

Enter a VLAN ID for the NWA3000-N series AP.

As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the

NWA3000-N series AP and not one assigned to it from outside the

network.

Apply Click Apply to save your changes back to the NWA3000-N series AP.

Reset Click Reset to return the screen to its last-saved settings.

Table 34 Configuration > LAN Setting (continued)

LABEL DESCRIPTION

Table 35 Configuration > LAN Setting > Add

LABEL DESCRIPTION

Type Select User-Defined to manually enter a DNS server’s IP address.

Select From DHCP to dynamically get a DNS server address from a

DHCP server.

DNS Server This appears when you set the Type to User-Defined. Enter the IP

address of a DNS server.

OK Click OK to save your customized settings and exit this screen.

Cancel Click Cancel to exit this screen without saving

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 385 386

No comments

ZyXEL NWA3000-N User Manual Page 110