ZyXEL zyxel Prestige100 User Manual download pdf (Page 69)

Remote Node Configuration 57

4. Multiple Link Options: Base Trans Rate - Select the base

data transfer rate for this Remote Node. This parameter is in

kilobits per second (Kbps). There are two options for this field:

• 64 - Only one channel will be used.

• 128 - Two channels will be used when a packet triggers a

call.

5. Multiple Link Options: Max Trans Rate - Enter the

maximum data transfer rate allowed for this Remote Node. This

parameter is in kilobits per second. There are two options for

this field:

• 64 - At most one channel can be used.

• 128 - A maximum of two channels can be used.

6. Multiple Link Options: Target Utility - Enter the two

thresholds separated by a ‘-’ for subtracting and adding the

second channel. The default is 32-48.

7. Multiple Link Options: Add Persist - This parameter

specifies the number of seconds there traffic is above the

adding threshold before the Prestige will bring up the second

channel. The default is 5 seconds.

8. Multiple Link Options: Subtract Persist - This parameter

specifies the number of seconds where traffic is below the

subtraction threshold before the Prestige drops the second

channel. The default is 5 seconds.

Once you have completed ‘Menu 11.2 - Remote Node PPP

Options’, press ENTER at the message: ‘Press ENTER to Confirm

...’ to confirm your selections, or press ESC to cancel your

selections.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 69