ZyXEL zyxel Prestige100 User Manual download pdf (Page 64)

52 Remote Node Configuration

from this node and call it back at the Outgoing Primary Phone

Number (see below).

8. Outgoing: My Login Name - This is a required field if Call

Direction is either ‘Both’ or ‘Out’. Enter the login name for the

Prestige when it calls this Remote Node.

9. Outgoing: My Password - This is a required field if Call

Direction is either ‘Both’ or ‘Out’. Enter the password for the

Prestige when it calls this Remote Node.

10. Outgoing: Authen - This field sets the authentication protocol

used for outgoing calls.

The Prestige supports two authentication protocols: PAP

(Password Authentication Protocol) and CHAP (Challenge

Handshake Authentication Protocol).

• PAP sends the user name and password in plain text.

• CHAP scrambles the password before it is sent over the

wire.

Generally speaking, CHAP is more secure than PAP; however,

PAP is readily available on more platforms. The

recommendation is to use CHAP whenever possible. Turning

off the authentication is STRONGLY discouraged.

Options for this field are:

• CHAP/PAP - Prestige will try CHAP when CHAP is

requested by the Remote Node or PAP when PAP is

requested by the Remote Node.

• CHAP - use CHAP only.

• PAP - use PAP only.

11. Outgoing: Pri(mary) Phone Sec(ondary) Phone Number -

Both the Primary Phone number and the Secondary Phone

number refer to the number that the Prestige will dial to

connect to the Remote Node. The Prestige will always call the

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 64