ZyXEL zyxel Prestige100 User Manual download pdf (Page 23)

Before You Begin 11

information in this section to place the order (see Chapter 13 for

information on provisioning your ISDN line). If you have already

installed your ISDN line, you can check the following section to

make sure that you can use all the features of your Prestige.

1. Contact your local telephone company’s ISDN Ordering

Center.

2. Find out what type of ISDN service is available. Please refer to

Chapter 13 to find out the provisioning information for the

appropriate switch type and ISDN service. For the U.S., the

Prestige (both U and S/T Interface) have been approved by

Bellcore and have IOC (ISDN Ordering Code) “S” Capability,

EZ-ISDN 1.

3. Provide your telephone company with the proper provisioning

information.

4. When the telephone company installs your ISDN line, please be

sure to obtain the following information:

• ISDN switch type.

• ISDN telephone number(s).

• ISDN Service Profile Identifiers (SPID) number(s) (only for

North America).

Collecting General Setup Information

The Prestige requires certain system information. You can obtain

all the pertinent information from your network administrator.

Record this information into the worksheet as it becomes available.

This worksheet will later be referred to as you configure your

Prestige.

• System Name - This is the name given to the Prestige for

identification purposes. This name should be no more than 8

alphanumeric characters. Spaces are not allowed, but “-” and

“_” are accepted.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 23