ZyXEL zyxel Prestige100 User Manual download pdf (Page 43)

Installation 31

switch; repeat until you see the correct switch type. The

Prestige will not be able to place or to receive calls if the wrong

switch type is specified. If you are not sure, contact your

telephone company to confirm the exact switch type.

2. B Channel Usage - In general, this will be ‘Switch/Switch’. If

you are only using one B channel (e.g., your Prestige is sharing

the ISDN BRI line with another device on the S/T bus), then

select ‘Switch/Unused’. The default is ‘Switch/Switch’.

3. Telephone Number(s) - Enter the telephone number(s)

assigned to your ISDN line by your telephone company. Some

switch types only have one telephone number. For North

America, these phone numbers should be in a standard seven

digit format (for example, 5551212). Note that the Prestige

only accepts digits; please do not include ‘-’ and spaces in this

field. This field should be no longer than 19 digits.

4. Analog Call - This tells the Prestige how to route an incoming

analog call. Set to ‘Phone1’ if you wish to route the incoming

analog call for this telephone number to the PHONE port 1

(a.k.a., ‘POTS’ port in North America and ‘A/B Adapter’ in

Europe). Set to ‘Phone2’ if you wish to route the incoming

analog call for this telephone number to PHONE port 2. Set to

‘DOVBS’ if you wish to receive incoming Data Over Voice

Bearer Service call.

5. SPID Number(s) - The SPID (Service Profile Identifier) is a

number used by a switch for identification purposes. Depending

on your switch type, you may have zero, one, or two SPIDs

assigned to your line. For example, if your switch type is

Northern Telecom Custom, you will have to enter two SPID

numbers.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 43