ZyXEL zyxel Prestige100 User Manual download pdf (Page 74)

62 Dial-In Configuration

Figure 6-3 Menu 13 - Default Dial-in Setup

From the Main Menu, enter ‘13’ to go to ‘Menu 13 - Default Dial-

in Setup’. This section will describe how to configure the protocol-

independent fields in this menu. For the protocol-dependent fields,

please refer to the appropriate chapters.

Telco Options: CLID Authen.

- This field sets the CLID

authentication parameter for all incoming calls. There are three

options for this field:

•

None

- No CLID is required.

•

Required

- Must provide CLID, or call is disconnected.

•

Preferred

- If the CLID is available then CLID will be

used to do authentication. If the CLID is not available the

call will continue.

PPP Options: Recv. Authen. -

This field sets the

authentication protocol used for incoming calls. User names

and passwords are configured in the next section (Remote

users/Dial-in Users Setup). Options for this field are:

•

CHAP/PAP

- Prestige will try CHAP first, but PAP will be

used if CHAP is not available.

•

CHAP

- use CHAP only.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 74