ZyXEL zyxel Prestige100 User Manual download pdf (Page 95)

Filter Configuration 83

3. IP Source Route - Determine, ‘Yes’ or ‘No’, whether to check

the source route.

4. Destination: IP Addr - In this field, enter the destination IP

Address of the packet you wish to filter. The address is usually

written in dotted decimal notation such as a.b.c.d where a, b, c,

and d are numbers between 0 and 255.

5. Destination: IP Mask - In this field, enter in the IP mask that

will be used to mask the bits of the IP Address given in

Destination: IP Addr.

6. Destination: Port # - Enter the destination port of the packets

that you wish to filter. The range of this field is 0 to 65535.

7. Destination: Port # Comp - In this field, you can select what

comparison quantifier you wish to enable to compare to the

value given in Destination: Port #. There are five options for

this field:

• None.

• Less.

• Greater.

• Equal.

• Not Equal.

8. Source: IP Addr - In this field, enter the source IP Address of

the packet you wish to filter. The address is usually written in

dotted decimal notation such as a.b.c.d where a, b, c, and d are

numbers between 0 and 255.

9. Source: IP Mask - In this field, enter in the IP mask that will

be used to mask the bits of the IP Address given in Source: IP

Addr.

10. Source: Port # - Enter the source port of the packets that you

wish to filter. The range of this field is 0 to 65535.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 95