ZyXEL zyxel Prestige100 User Manual download pdf (Page 115)

System Maintenance 103

highly recommended once your Prestige configuration is

functioning.

You need to download the configuration onto disk. Procedure for

downloading varies depending on the type of software used to

access the Prestige but you must use the XMODEM protocol to

perform the download.

Restore Configuration

Selecting option 6 from ‘Menu 24 - Maintenance’ will restore

backup configuration from disk to the Prestige. You need to upload

a backup file to the Prestige. Procedure for uploading varies

depending on the type of software used to access the Prestige but

you must use the XMODEM protocol to restore the configuration.

Please keep in mind that configuration is stored on flash ROM in

the Prestige so even if power failure were to occur, your

configuration is safe.

Software Update

Software updates are only possible through the RS-232 cable

connection. You cannot use telnet to update the software

version of your Prestige. Please note that this function will delete

the old software before installing the new software. Do not attempt

to utilize this menu unless you have the new software version.

There are two different software updates: RAS code and ISDN

code.

• RAS and ISDN code update - Type ‘atur’ and wait until the

Prestige responds with an OK to begin uploading the new

software (upload procedure varies depending on the type of

software used to access the Prestige). You must use the

XMODEM protocol to perform the upload. After uploading is

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 129 130

No comments

ZyXEL zyxel Prestige100 User Manual Page 115