ZyXEL NBG4615 User Manual download pdf (Page 96)

Chapter 12 WISP Mode

NBG4615 User’s Guide

12.5.1 Static WEP

Use this screen if the access point to which you want to connect to uses WEP security mode.

Figure 67 WEP (WISP)

The following table describes the labels in this screen.

Apply Click Apply to save your changes back to the NBG4615.

Cancel Click Cancel to reload the previous configuration for this screen.

Table 39 No Security (WISP) (continued)

LABEL DESCRIPTION

Table 40 WEP (WISP)

LABEL DESCRIPTION

WISP Parameters

SSID Enter the name of the access point to which you are connecting.

Channel

Selection

The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called

a channel. The device will automatically select the channel with the least

interference.

Security Mode Select Static WEP to enable data encryption.

PassPhrase Enter a Passphrase (up to 26 printable characters) and click Generate.

A passphrase functions like a password. In WEP security mode, it is further

converted by the NBG4615 into a complicated string that is referred to as the “key”.

This key is requested from all devices wishing to connect to a wireless network.

WEP

Encryption

Select 64-bit WEP or 128-bit WEP.

This dictates the length of the security key that the network is going to use.

ASCII Select this option in order to enter ASCII characters as WEP key.

Hex Select this option in order to enter hexadecimal characters as a WEP key.

The preceding "0x", that identifies a hexadecimal key, is entered automatically.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 363 364

No comments

ZyXEL NBG4615 User Manual Page 96