ZyXEL NBG4615 User Manual download pdf (Page 53)

Chapter 6 Monitor

NBG4615 User’s Guide

6.6 Packet Statistics

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information

here includes port status, packet specific statistics and the "system up time". The Poll Interval(s)

field is configurable and is used for refreshing the screen.

Figure 28 Summary: Packet Statistics

The following table describes the labels in this screen.

Table 19 Summary: Packet Statistics

LABEL DESCRIPTION

Port This is the NBG4615’s port type.

Status For the LAN ports, this displays the port speed and duplex setting or Down

when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re using

Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a

call) and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation.

This field displays Down when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is

enabled and Down when the WLAN is disabled.

TxPkts This is the number of transmitted packets on this port.

RxPkts This is the number of received packets on this port.

Collisions This is the number of collisions on this port.

Tx B/s This displays the transmission speed in bytes per second on this port.

Rx B/s This displays the reception speed in bytes per second on this port.

Up Time This is the total time the NBG4615 has been for each session.

System Up Time This is the total time the NBG4615 has been on.

Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.

Set Interval Click this button to apply the new poll interval you entered in the Poll

Interval(s) field.

Stop Click Stop to stop refreshing statistics.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 363 364

No comments

ZyXEL NBG4615 User Manual Page 53