ZyXEL NBG4615 User Manual download pdf (Page 94)

Chapter 12 WISP Mode

NBG4615 User’s Guide

12.4.0.1 Navigation Panel

Use the menu in the navigation panel to configure NBG4615 features in WISP mode.

The following screen and table show the features you can configure in Access Point mode.

Figure 64 Menu: WISP Mode

Refer to Table 30 on page 72 for descriptions of the labels shown in the Navigation panel.

DHCP Table Click Details... to go to the Monitor > DHCP Table screen (Section 6.5 on page 51). Use

this screen to view current DHCP client information.

Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 6.6 on page 53).

Use this screen to view port status and packet specific statistics.

Interface Status

Interface This displays the NBG4615 port types. The port types are: LAN and WLAN.

Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or

connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is

disabled.

Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the line is

disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet

encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping

a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is

disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/

A when the WLAN is disabled.

Table 37 Status Screen: WISP Mode (continued)

LABEL DESCRIPTION

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 363 364

No comments

ZyXEL NBG4615 User Manual Page 94