ZyXEL NBG4615 User Manual download pdf (Page 224)

Chapter 29 Maintenance

NBG4615 User’s Guide

224

29.10 Sys OP Mode Screen

Use this screen to select how you want to use your NBG4615.

Figure 151 Maintenance > Sys OP Mode

The following table describes the labels in the General screen.

Table 90 Maintenance > Sys OP Mode

LABEL DESCRIPTION

System Operation Mode

Router Select Router Mode if your device routes traffic between a local network

and another network such as the Internet. This mode offers services such

as a firewall or bandwidth management.

You can configure the IP address settings on your WAN port. Contact your

ISP or system administrator for more information on appropriate settings.

Access Point Select Access Point Mode if your device bridges traffic between clients

on the same network.

•In Access Point Mode, all Ethernet ports have the same IP address.

• All ports on the rear panel of the device are LAN ports, including the

port labeled WAN. There is no WAN port.

• The DHCP server on your device is disabled.

• The IP address of the device on the local network is set to

192.168.1.2.

Universal Repeater Mode Select Universal Repeater Mode if you want to have wireless clients

associate with the NBG4615 and also want to connect the NBG4615 to an

existing access point.

• In addition to wireless LAN settings between the NBG4615 and

wireless clients, you also need to configure security and wireless

settings between the NBG4615 and another access point.

• WDS is not available when the NBG4615 is in Universal Repeater

Mode.

• The IP address of the device on the local network is the same as the IP

address given to the NBG4615 while in Access Point Mode (default is

192.168.1.2).

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 363 364

No comments

ZyXEL NBG4615 User Manual Page 224