ZyXEL NBG4615 User Manual download pdf (Page 86)

Chapter 11 Universal Repeater Mode

NBG4615 User’s Guide

11.5.0.1 Navigation Panel

Use the menu in the navigation panel to configure NBG4615 features in Universal Repeater

mode.

The following screen and table show the features you can configure in Universal Repeater mode.

Figure 56 Menu: Universal Repeater Mode

Refer to Table 30 on page 72 for descriptions of the labels shown in the Navigation panel.

11.6 Universal Repeater Screen

Use this screen to enter the SSID and select the wireless security mode used by the wireless device

to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to

open the Universal Repeater screen. The screen varies depending on security mode.

Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 6.6 on page 53).

Use this screen to view port status and packet specific statistics.

WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 6.7 on page

54). Use this screen to view the wireless stations that are currently associated to the

NBG4615.

Interface Status

Interface This displays the NBG4615 port types. The port types are: LAN and WLAN.

Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or

connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is

disabled.

Rate For the LAN ports, this displays the port speed or N/A when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/

A when the WLAN is disabled.

Table 33 Status Screen: Universal Repeater Mode (continued)

LABEL DESCRIPTION

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 363 364

No comments

ZyXEL NBG4615 User Manual Page 86