ZyXEL NBG4615 User Manual download pdf (Page 103)

Chapter 13 WISP + UR Mode

NBG4615 User’s Guide

103

13.4.0.1 Navigation Panel

Use the menu in the navigation panel to configure NBG4615 features in WISP + UR mode.

- Memory Usage This shows what percentage of the heap memory the NBG4615 is using.

System Setting

- Firewall This shows whether the firewall is enabled or not.

- Bandwidth

Management

This shows whether the bandwidth management is enabled or not.

- UPnP This shows whether UPnP is enabled or not.

- Configuration Mode This shows the web configurator mode you are viewing - Expert.

IPv6 Status

Item This column shows the type of data the NBG4615 is recording.

Data This column shows the actual data recorded by the NBG4615.

IPv6 Connection Type This shows the type of IPv6 connection that is currently in use.

LAN IPv6 Link Local Address This shows the NBG4615’s LAN IPv6 link local address.

Summary

BW MGMT Monitor Click Details... to go to the Monitor > BW MGMT Monitor screen (Section 6.4 on page

51). Use this screen to view the amount of network bandwidth that applications running in

the network are using.

DHCP Table Click Details... to go to the Monitor > DHCP Table screen (Section 6.5 on page 51). Use

this screen to view current DHCP client information.

Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 6.6 on page 53).

Use this screen to view port status and packet specific statistics.

Interface Status

Interface This displays the NBG4615 port types. The port types are: LAN and WLAN.

Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or

connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is

disabled.

Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the line is

disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet

encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping

a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is

disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/

A when the WLAN is disabled.

Table 43 Status Screen: WISP + UR Mode (continued)

LABEL DESCRIPTION

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 363 364

No comments

ZyXEL NBG4615 User Manual Page 103