Chapter 29 Maintenance
NBG4615 User’s Guide
225
Note: If you select the incorrect System Operation Mode you may not be able to connect
to the Internet.
WISP Mode Select WISP Mode if your device needs a wireless client to connect to an
existing access point.
• You cannot configure Wireless LAN settings (including WPS) and
scheduling in the WISP Mode.
• The IP address of the device on the local network is the same as the IP
address given to the NBG4615 while in router mode (default is
192.168.1.1).
Apply Click Apply to save your settings.
Cancel Click Cancel to return your settings to the default (Router).
Table 90 Maintenance > Sys OP Mode (continued)
LABEL DESCRIPTION
Comments to this Manuals