ZyXEL P-2812HNU-51c User Manual download pdf (Page 487)

Appendix F IPv6

P-2812HNU-51c User’s Guide

487

Each IA must be associated with exactly one interface. The DHCP client uses the

IA assigned to an interface to obtain configuration from a DHCP server for that

interface. Each IA consists of a unique IAID and associated IP information.

The IA type is the type of address in the IA. Each IA holds one type of address.

IA_NA means an identity association for non-temporary addresses and IA_TA is an

identity association for temporary addresses. An IA_NA option contains the T1 and

T2 fields, but an IA_TA option does not. The DHCPv6 server uses T1 and T2 to

control the time at which the client contacts with the server to extend the lifetimes

on any addresses in the IA_NA before the lifetimes expire. After T1, the client

sends the server (S1) (from which the addresses in the IA_NA were obtained) a

Renew message. If the time T2 is reached and the server does not respond, the

client sends a Rebind message to any available server (S2). For an IA_TA, the

client may send a Renew or Rebind message at the client's discretion.

DHCP Relay Agent

A DHCP relay agent is on the same network as the DHCP clients and helps forward

messages between the DHCP server and clients. When a client cannot use its link-

local address and a well-known multicast address to locate a DHCP server on its

network, it then needs a DHCP relay agent to send a message to a DHCP server

that is not attached to the same network.

The DHCP relay agent can add the remote identification (remote-ID) option and

the interface-ID option to the Relay-Forward DHCPv6 messages. The remote-ID

option carries a user-defined string, such as the system name. The interface-ID

option provides slot number, port information and the VLAN ID to the DHCPv6

server. The remote-ID option (if any) is stripped from the Relay-Reply messages

before the relay agent sends the packets to the clients. The DHCP server copies

the interface-ID option from the Relay-Forward message into the Relay-Reply

message and sends it to the relay agent. The interface-ID should not change even

after the relay agent restarts.

Prefix Delegation

Prefix delegation enables an IPv6 router to use the IPv6 prefix (network address)

received from the ISP (or a connected uplink router) for its LAN. The P-2812HNU-

51c uses the received IPv6 prefix (for example, 2001:db2::/48) to generate its

LAN IP address. Through sending Router Advertisements (RAs) regularly by

Renew

Rebind

to S1

Renew

to S1

Renew

to S1

Renew

to S1

Renew

to S1

Renew

to S1

to S2

1 2 ... 482 483 484 485 486 487 488 489 490 491 492 ... 521 522

Comments to this Manuals

No comments

ZyXEL P-2812HNU-51c User Manual Page 487

Comments to this Manuals

Related products and manuals for Networking ZyXEL P-2812HNU-51c