ZyXEL P-2812HNU-51c User Manual download pdf (Page 158)

100

101

Chapter 7 Wireless LAN

P-2812HNU-51c User’s Guide

158

The following table describes the wireless LAN security labels in this screen.

7.4.4 WPA(2) Authentication

Use this screen to configure and enable WPA or WPA2 authentication; click the

Wireless LAN link under Network to display the General screen. Select WPA or

WPA2 from the Security Mode list.

Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or

WPA2 in the Wireless LAN > General screen.

Table 37 Wireless LAN > General: WPA(2)-PSK

LABEL DESCRIPTION

Auto Generate

Key

This field is only available for WPA-PSK.

Select this option to have the P-2812HNU-51c automatically generate

an SSID and pre-shared key. The SSID and Pre-Shared Key fields will

not be configurable when you select this option.

Security Mode Choose WPA-PSK or WPA2-PSK from the drop-down list box.

Active

Compatible

This field is only available for WPA2-PSK. Select this if you want the P-

2812HNU-51c to support WPA-PSK and WPA2-PSK simultaneously.

Encryption Select the encryption type (TKIP, AES or TKIP+AES) for data

encryption.

Select TKIP if your wireless clients can all use TKIP.

Select AES if your wireless clients can all use AES.

Select TKIP+AES to allow the wireless clients to use either TKIP or

AES.

Pre-Shared Key The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the

same. The only difference between the two is that WPA(2)-PSK uses a

simple common password, instead of user-specific credentials.

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters

(including spaces and symbols).

Group Key

Update Timer

The Group Key Update Timer is the rate at which the AP sends a new

group key out to all clients.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 521 522

Comments to this Manuals

No comments

ZyXEL P-2812HNU-51c User Manual Page 158

Comments to this Manuals

Related products and manuals for Networking ZyXEL P-2812HNU-51c