ZyXEL P-2812HNU-51c User Manual Page 310

  • Download
  • Add to my manuals
  • Print
  • Page
    / 522
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 309
Chapter 19 Quality of Service (QoS)
P-2812HNU-51c User’s Guide
310
the IEEE 802.1p priority level, IP precedence or packet length. See Section 19.1
on page 307 for more information.
Figure 158 QoS General
The following table describes the labels in this screen.
Table 101 QoS General
LABEL DESCRIPTION
Enable QoS Select the check box to turn on QoS to improve your network
performance.
WAN Managed
Upstream
Bandwidth
Enter the amount of upstream bandwidth for the WAN interface that you
want to allocate using QoS.
The recommendation is to set this speed to match the interface’s actual
transmission speed. For example, set the WAN interface speed to
100000 kbps if your Internet connection has an upstream transmission
speed of 100 Mbps.
You can set this number higher than the interface’s actual transmission
speed. The P-2812HNU-51c uses up to 95% of the DSL port’s actual
upstream transmission speed even if you set this number higher than
the DSL port’s actual transmission speed.
You can also set this number lower than the interface’s actual
transmission speed. This will cause the P-2812HNU-51c to not use some
of the interface’s available bandwidth.
If you leave this field blank, the P-2812HNU-51c automatically sets this
number to be 95% of the DSL port’s actual upstream transmission
speed.
LAN/WLAN
Managed
Downstream
Bandwidth
Enter the amount of downstream bandwidth for the LAN/WLAN interface
that you want to allocate using QoS.
Page view 309
1 2 ... 305 306 307 308 309 310 311 312 313 314 315 ... 521 522

Comments to this Manuals

No comments