ZyXEL NWA-3160 User Manual Page 89

  • Download
  • Add to my manuals
  • Print
  • Page
    / 372
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 88
Chapter 5 Management Mode
NWA-3160 Series User’s Guide
89
DHCP Option 43 allows the CAPWAP management request (from the AP in
managed AP mode) to reach the AP controller in a different subnet, as shown in
the following figure.
Figure 57 CAPWAP and DHCP Option 43
5.2.4 Notes on CAPWAP
This section lists some additional features of ZyXELs implementation of the
CAPWAP protocol.
When the AP controller uses its internal Remote Authentication Dial In User
Service (RADIUS) server, managed APs also use the AP controller’s
authentication server to authenticate wireless clients.
Only one AP controller can exist in any single broadcast domain.
If a managed AP’s link to the AP controller is broken, the managed AP continues
to use the wireless settings with which it was last provided.
5.3 The Management Mode Screen
Use this screen to configure the NWA as a CAPWAP controller AP, a CAPWAP
managed AP, or to use it in its default standalone mode.
Note: If you are using several NWA models in your network including an NWA-3166,
you should use the NWA-3166 as the Controller AP.
SUBNET 1 SUBNET 2
AP
CONTROLLER
MANAGED
AP
DHCP
SERVER
+ OPTION 43
CAPWAP
TRAFFIC
(DYNAMIC
IP)
(STATIC IP)
Page view 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 371 372

Comments to this Manuals

No comments