ZyXEL NWA-3160 User Manual download pdf (Page 60)

Chapter 3 Tutorials

NWA-3160 Series User’s Guide

5 In the Send Immediate Alert section, select the events you want to trigger

immediate e-mails. Ensure that Rogue AP is selected.

6 Click Apply.

3.4.4 Configure Your Other Access Points

Access point A is now configured to do the following.

• Scan for access points in its coverage area every ten minutes.

• Recognize friendly access points from a list.

• Send immediate alerts to your email account if it detects an access point not on

the list.

Now you need to configure the other wireless access points on your network to do

the same things.

For each access point, take the following steps.

1 From a computer on the wired network, enter the access point’s IP address and

addresses.

2 Import the friendly AP list. Click ROGUE AP > Configuration > Browse.... Find

the “Flist” file where you previously saved it on the network and click Open.

3 Click Import. Check the ROGUE AP > Friendly AP screen to ensure that the

friendly AP list has been correctly uploaded.

4 Activate periodic rogue AP detection. See Section 3.4.2 on page 58.

5 Set up e-mail logs as in Section 3.4.3 on page 59, but change the Mail Subject

field so you can tell which AP the alerts come from (“ALERT_Access_Point_B”, etc.)

3.4.5 Test the Setup

Next, test your setup to ensure it is correctly configured.

• Log into each AP’s Web configurator and click ROGUE AP > Rogue AP. Click

Refresh. If any of the MAC addresses from Section 3.4.1 on page 55 appear in

the list, the friendly AP function may be incorrectly configured - check the

ROGUE AP > Friendly AP screen.

If any entries appear in the rogue AP list that are not in Section 3.4.1 on page

55, write down the AP’s MAC address for future reference and check your e-mail

inbox. If you have received a rogue AP alert, email alerts are correctly

configured on that NWA.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 371 372

No comments

ZyXEL NWA-3160 User Manual Page 60