ZyXEL NWA-3160 User Manual download pdf (Page 113)

Chapter 7 System Screens

NWA-3160 Series User’s Guide

113

7.3 Password Screen

Use this screen to control access to your NWA by assigning a password to it. Click

System > Password. The following screen displays.

Figure 71 System > Password.

Note: Even if you uncheck Enable Admin at Local, you still use the password set

here to log in via the console port (not available on all models).

The following table describes the labels in this screen.

Table 20 System > Password

LABEL DESCRIPTIONS

Enable Admin at

Local

Select this check box to have the device authenticate local

management logins to the device.

Use old setting Select this to have the NWA use the local management password

already configured on the device (“1234” is the default).

Use new setting Select this if you want to change the local management password.

Old Password Type in your existing system password (“1234” is the default

password).

New Password Type your new system password (up to 31 characters). Note that as

you type a password, the screen displays an asterisk (*) for each

character you type.

Retype to

Confirm

Retype your new system password for confirmation.

Enable Admin on

RADIUS

Select this (and configure the other fields in this section) to have a

RADIUS server authenticate management logins to the NWA.

Use old setting Select this to have a RADIUS server authenticate management

logins to the NWA using the RADIUS username and password

already configured on the device.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 371 372

No comments

ZyXEL NWA-3160 User Manual Page 113