Chapter 6 AP Controller Mode
NWA-3160 Series User’s Guide
101
6.5 Configuration Screen
Use this screen to control the way in which the NWA accepts new APs to manage.
You can also configure the pre-shared key (PSK) that is used to secure the data
transmitted between the NWA and the APs it manages.
When the NWA is in AP controller mode, click CONTROLLER > Configuration.
The following screen displays.
Figure 65 Configuration Screen
The following table describes the labels in this screen.
Table 14 Configuration Screen
LABEL DESCRIPTION
Pre-Shared Key This is the security key used to encrypt communications
between the NWA and its managed APs. This key is used to
encrypt DTLS (Datagram Transport Layer Security)
transmissions. Enter 8~32 English keyboard characters.
The proprietary AutoPSK protocol transfers the DTLS key
from the NWA to the managed APs automatically.
Registration Type This controls whether the NWA manages all CAPWAP-
enabled APs that transmit management request packets, or
requires you to select which APs to manage.
•Select Manual to choose which APs to manage (select
the APs you want to manage in the
Controller > AP
Lists
screen).
•Select Always Accept to have the NWA manage any AP
on your network that transmits a CAPWAP request for
management.
Apply Click this to save the changes in this screen.
Reset Click this to return the fields in this screen to their
previously-saved values.
Comments to this Manuals