ZyXEL VSG-1200 User Manual download pdf (Page 66)

VSG-1200 V2 User’s Guide

Chapter 6 LAN and WAN Setup 66

6.5.4 WAN Port Mode: PPTP

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data

from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/

IP-based networks.

PPTP supports on-demand, multi-protocol, and virtual private networking over public

networks, such as the Internet.

Username Enter the user name exactly as assigned by your ISP.

If the name is assigned in the form user@domain where domain identifies a

service name, then enter both components exactly as given.

Password Enter the password associated with the user name above.

PPP MTU Setting Enter the size of a Maximum Transmission Unit (MTU).

TCP MSS Setting Enter the size of the Maximum Segment Size (MSS).

Service Name Enter the name of your PPPoE service.

Connect on Demand Select this option when you don’t want the connection up all the time and specify

an idle timeout in the Max Idle Time field (maximum 65535 minutes). This is the

default setting with an idle timeout of 10 minutes.

Keep Alive Select this option when you want the Internet connection up all the time and

specify a redial period in the Redial Period field (maximum 65535 seconds).

When disconnected, the VSG will attempt to bring up the connection after the

redial period.

Table 8 System Settings: WAN/LAN: PPPoE (continued)

FIELD DESCRIPTION

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 281 282

No comments

ZyXEL VSG-1200 User Manual Page 66