ZyXEL VSG-1200 User Manual download pdf (Page 225)

VSG-1200 V2 User’s Guide

225 Chapter 32 Using The SMT

In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen. To

return to the Main Menu screen, press 3.

Figure 171 SMT: Utilities Menu

32.9.1 Firmware Upgrade

Note: You MUST run a TFTP server on a computer where a firmware file is stored to

upgrade the firmware on the VSG.

You MUST have a WAN/LAN connection between the VSG and the TFTP

server computer at the same time.

Follow the steps below to configure the TFTP settings in the SMT.

1 Connect the computer directly to the VSG through the console port. Refer to the section

on establishing a console port connection for more information.

2 In the SMT main menu, type 5 and press [ENTER] to display the Utilities Menu screen.

3 Type 1 and press [ENTER] to display the Firmware Upgrade screen.

4 Enter the IP address of the computer running the TFTP server in the TFTP Server IP

Address field.

5 Specify the name of the firmware file in the Download Filename field.

Figure 172 SMT: Firmware Upgrade

Utilities Menu

1)Firmware Upgrade

2)Change Password

3)Return to Main Menu

Enter selection:

Enter a numeric between 1 and 3.

Firmware Upgrade

TFTP Server IP Address :172.21.4.72

Download Filename :vsg1200v105.bin

E)xecute Download R)eturn to Main Menu M)odify

Enter Selection:

Enter the command key and press enter.

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 281 282

No comments

ZyXEL VSG-1200 User Manual Page 225