ZyXEL VSG-1200 User Manual download pdf (Page 42)

VSG-1200 V2 User’s Guide

Chapter 3 The Web Configurator 42

CHAPTER 3

The Web Configurator

This chapter introduces how to access the web configurator and perform general system

configuration.

3.1 Introducing the Web Configurator

The web configurator is best viewed with Internet Explorer (version 5.5 or above) or Netscape

(version 6. or later).

Note: JavaScript support must be enabled.

3.2 Accessing the Web Configurator

Follow the steps below to access the web configurator.

Note: The VSG allows only one web configurator session at a time.

1 Make sure your VSG is properly connected (refer to the instructions in Chapter 2 on page

38).

2 Launch your web browser and type the WAN or LAN IP address of the VSG as the web

site address. 192.168.1.1 is the default IP address for the WAN port and 10.59.1.1 is the

default IP address for the LAN port.

3 If you are using a different port number (between 8000 and 8099) for the web server, you

must also append the port number to the WAN IP address separated with a colon “:”, for

example, http://192.168.1.1:8080.

Figure 8 Entering IP Address in Internet Explorer

4 A login screen displays. Type “admin” (default) as the administrator user name and

"1234" (default) as the password and click Get Started ...

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 281 282

No comments

ZyXEL VSG-1200 User Manual Page 42