ZyXEL VSG-1200 User Manual download pdf (Page 190)

VSG-1200 V2 User’s Guide

Chapter 28 System Status 190

Click System Status and LAN Devices Status to display the screen as shown next. This

screen automatically updates every minute.

Figure 127 System Status: LAN Device Status

The following table describes the labels in this screen.

28.7.1 Accessing the LAN Device

Before you can access a LAN device behind the VSG, the following requirements must be

met.

• The LAN device has a web-based management interface and it is enabled.

• You have set up the virtual port mapping to the LAN device server port in the LAN

Device Management screen.

• The LAN device status is OK in the LAN Device Status screen.

There are two methods to access the LAN device: directly or through the web configurator.

• To access the LAN device through the web configurator, open the LAN Device Status

screen and click the device name. A new Internet browser should display showing the

Table 66 System Status: LAN Device Status

LABEL DESCRIPTION

No This field displays the index number.

Device Name This field displays the name of the LAN device. Click the device name to access

web-based management interface of the LAN device if the Status field is OK.

For more information on accessing a LAN device, refer to Section 28.7.1 on

page 190.

Status This field displays the current status of the LAN device. It displays OK when the

LAN device is turned on and working properly. Otherwise it displays Fail.

Virtual Port This field displays the virtual port number.

Device IP Address This field displays the IP address of the LAN device.

Device Server Port This field displays the server port number of the LAN device.

Device MAC

Address

This field displays the MAC address of the LAN device.

Application This field displays the type of application packet that is forwarded to the LAN

device.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 281 282

No comments

ZyXEL VSG-1200 User Manual Page 190