ZyXEL PLA-407 User Manual download pdf (Page 78)

Chapter 9 LEDs and Troubleshooting

PLA-407 User’s Guide

The following table describes the behavior of the lights on the PLA-407.

Table 15 PLA-407 Lights

LIGHTS ICON COLOR

STATU

DESCRIPTION

POWER Green On The PLA-407 is on and receiving power.

Blinking The

PLA-407 is starting up.

It also indicates the

PLA-407 is trying to

connect with another device using the ENCRYPT

function.

The encryption process failed (120 seconds time

out)

Blinking at the same time as the HomePlug light

indicates an unsuccessful connection if you have

used the ENCRYPT button.

The Power LED blinks when it is in Low Power

mode. Refer to Section 1.1.5 on page 18 for

details on this feature.

Off The

PLA-407 is not receiving power.

HomePlug Green On The PLA-407 detects another Powerline

adapter. The data transfer rate is greater than

40 Mbps.

Amber The PLA-407 detects another Powerline

adapter. The data transfer rate is between

12~20 Mbps.

Red The

PLA-407 detects another Powerline

adapter. The data transfer rate is between 0~12

Mbps.

Green/

Amber/

Red

Blinking The PLA-407 is communicating with another

Powerline adapter. Data is being transmitted

and/or received.

Blinking at the same time as the POWER light

indicates an unsuccessful connection if you have

used the ENCRYPT button.

Off The HomePlug port does not detect another

Powerline adapter.

ETHERNET Green On The ETHERNET port is on and ready and the

PLA-407 detects a device connected to it.

Blinking The

PLA-407 is communicating with a

networking device connected to it.

Off The PLA-407 does not detect any devices

connected to its ETHERNET port.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 93 94

Comments to this Manuals

No comments

ZyXEL PLA-407 User Manual Page 78

Comments to this Manuals

Related products and manuals for PowerLine network adapters ZyXEL PLA-407