ZyXEL PLA-407 User Manual download pdf (Page 33)

Chapter 4 The ENCRYPT Button

PLA-407 User’s Guide

4.2.1 Expanding the Network with ENCRYPT

If you want to add more Powerline devices to your network after the initial setup

(refer to Section 4.2 on page 31), do the following.

1 To add more Powerline devices to your network, press the ENCRYPT button on

device C (shown below) for more than 10 seconds until the power ( ) light

flashes.

2 Then repeat steps 4 and 5 in the previous section using any Powerline device (A or

B) you have connected using ENCRYPT and the Powerline device you want to

connect (C). You must use the ENCRYPT button on both devices.

Figure 11 Adding More Powerline Adapters to Your Network

3 If you have previously disconnected your computer or modem (or any other

networking product connected to your Powerline device), you can now reconnect

them.

This sets up your Powerline network between your Powerline devices.

4.3 Setting Up Multiple Networks

You can use the ENCRYPT button to set up multiple Powerline networks using

your existing Powerline network.

A or B

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 93 94

No comments

ZyXEL PLA-407 User Manual Page 33