ZyXEL PLA-407 User Manual download pdf (Page 18)

Chapter 1 Introducing the PLA-407

PLA-407 User’s Guide

1.1.5 Low Power Mode

Your PLA-407 is a certified green product. It goes into Low Power mode when

there is no Ethernet connection.

When you plug the PLA-407 into an electric socket, it waits for an Ethernet

connection. When no connection is detected after sixty (60) seconds, the Power

LED ( ) blinks indicating that it is going into Low Power mode.

The same process occurs when you disconnect the PLA-407 from a previously

working Ethernet connection. Sixty (60) seconds after disconnecting the Ethernet

cable, the PLA-407’s Power LED blinks signalling that it is going into Low Power

mode.

The Ethernet and HomePlug LEDs are turned off in Low Power mode.

While in Low Power mode, you cannot use the ENCRYPT button. To enable the

ENCRYPT button again, you have to connect the PLA-407’s Ethernet cable to a

computer/notebook or modem/router first. The PLA-407 wakes up from Low

Power mode and you can start using the ENCRYPT button.

Low Power mode is enabled by default.

See Chapter 10 on page 85 for detailed product specifications.

1.2 Expand Your Network with the PLA-407

Connect your PLA-407 to an Internet gateway such as a modem and plug it into a

power outlet in your home (1). Plug a second PLA-407 into another power outlet

(2) and connect a computer to the PLA-407 for Internet access (3).

Figure 4 Expand Your Network with the PLA-407

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 93 94

No comments

ZyXEL PLA-407 User Manual Page 18