ZyXEL GS2200-8/24 User Manual download pdf (Page 75)

100

101

Chapter 8 Basic Setting

GS2200-8/24 User’s Guide

8.7 Port Setup

Use this screen to configure Switch port settings. Click Basic Setting > Port Setup in the

navigation panel to display the configuration screen.

Figure 45 Basic Setting > Port Setup

The following table describes the labels in this screen.

Table 13 Basic Setting > Port Setup

LABEL DESCRIPTION

Port This is the port index number.

* Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this row first

to set the common settings and then make adjustments on a port-by-port basis.

Note: Changes in this row are copied to all the ports as soon as you make them.

Active Select this check box to enable a port. The factory default for all ports is enabled. A port must

be enabled for data transmission to occur.

Name Enter a descriptive name that identifies this port. You can enter up to 64 alpha-numerical

characters.

Note: Due to space limitation, the port name may be truncated in some web configurator

screens.

Type This field displays 10/100M for Fast Ethernet connections and 10/100/1000M for Gigabit

connections.

1 ... 74 75 76 ... 332

Comments to this Manuals

No comments

ZyXEL GS2200-8/24 User Manual Page 75

Comments to this Manuals

Related products and manuals for Network switches ZyXEL GS2200-8/24