ZyXEL ES-2024 Series User Manual download pdf (Page 56)

Chapter 5 Initial Setup Example

ES-2024 Series User’s Guide

1 Click Advanced Application

and VLAN in the navigation

panel and click the Static

VLAN link.

2 In the Static VLAN screen,

select ACTIVE, enter a

descriptive name in the Name

field and enter 2 in the VLAN

Group ID field for the VLAN2

network.

" The VLAN Group ID field in this screen and the VID field in the IP Setup

screen refer to the same VLAN ID.

3 Since the VLAN2 network is connected to port 10 on the Switch, select Fixed to

configure port 10 to be a permanent member of the VLAN only.

4 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames

properly, clear the TX Tagging check box to set the Switch to remove VLAN tags before

sending.

5 Click Add to create the static VLAN and click the Save button to save the settings.

5.1.2 Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames

are forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 10 so that any untagged frames

received on that port get sent to VLAN 2.

1 ... 55 56 57 ... 266

No comments

ZyXEL ES-2024 Series User Manual Page 56