ZyXEL ES-2024 Series User Manual download pdf (Page 181)

Chapter 24 Differentiated Services

ES-2024 Series User’s Guide

181

Figure 97 IP Application > DiffServ

The following table describes the labels in this screen.

24.3 DSCP-to-IEEE 802.1p Priority Settings

You can configure the DSCP to IEEE 802.1p mapping to allow the Switch to prioritize all

traffic based on the incoming DSCP value according to the DiffServ to IEEE 802.1p mapping

table.

Table 64 IP Application > DiffServ

LABEL DESCRIPTION

Active Select this option to enable DiffServ on the Switch.

Port This field displays the index number of a port on the Switch.

* Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. Use this

row first to set the common settings and then make adjustments on a port-by-port

basis.

Note: Changes in this row are copied to all the ports as soon as you

make them.

Active Select Active to enable DiffServ on the port.

Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

these changes if it is turned off or loses power, so use the Save link on the top

navigation panel to save your changes to the non-volatile memory when you are done

configuring.

Cancel Click Cancel to begin configuring this screen afresh.

1 ... 180 181 182 ... 266

No comments

ZyXEL ES-2024 Series User Manual Page 181