ZyXEL ADSL2+ User Manual download pdf (Page 63)

Prestige 660RU-Tx Series User’s Guide

Chapter 5 LAN Setup 62

Client IP Pool

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

Size of Client IP

Pool

This field specifies the size or count of the IP address pool.

Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the

DHCP clients along with the IP address and the subnet mask.

Secondary DNS

Server

As above.

Remote DHCP

Server

If Relay is selected in the DHCP field above then enter the IP address of the

actual remote DHCP server here.

TCP/IP

IP Address Enter the IP address of your Prestige in dotted decimal notation, for example,

192.168.1.1 (factory default).

IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).

RIP Direction Select the RIP direction from None, Both, In Only and Out Only.

RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to

establish membership in a multicast group. The Prestige supports both IGMP

version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.

Any IP Setup Select the Active checkbox to enable the Any IP feature. This allows a computer

to access the Internet without changing the network settings (such as IP address

and subnet mask) of the computer, even when the IP addresses of the computer

and the Prestige are not in the same subnet.

When you disable the Any IP feature, only computers with dynamic IP addresses

or static IP addresses in the same subnet as the Prestige’s LAN IP address can

connect to the Prestige or access the Internet through the Prestige.

Apply Click Apply to save your changes back to the Prestige.

Cancel Click Cancel to begin configuring this screen afresh.

Table 11 LAN Setup (continued)

LABEL DESCRIPTION

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 285 286

No comments

ZyXEL ADSL2+ User Manual Page 63