ZyXEL ADSL2+ User Manual Page 59

  • Download
  • Add to my manuals
  • Print
  • Page
    / 286
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 58
Prestige 660RU-Tx Series User’s Guide
Chapter 5 LAN Setup 58
5.4 LAN TCP/IP
The Prestige has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.
5.4.1 Factory LAN Defaults
The LAN parameters of the Prestige are preset in the factory with the following values:
IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit
DNS server address(es), read the embedded web configurator help regarding what fields need
to be configured.
5.4.2 IP Address and Subnet Mask
Refer to the IP Address and Subnet Mask section in Chapter 3 Wizard Setupfor this
information.
5.4.3 RIP Setup
RIP (Routing Information Protocol) allows a router to exchange routing information with
other routers. The RIP Direction field controls the sending and receiving of RIP packets.
When set to:
Both - the Prestige will broadcast its routing table periodically and incorporate the RIP
information that it receives.
In Only - the Prestige will not send any RIP packets but will accept all RIP packets
received.
Out Only - the Prestige will send out RIP packets but will not accept any RIP packets
received.
None - the Prestige will not send any RIP packets and will ignore any RIP packets
received.
The Version field controls the format and the broadcasting method of the RIP packets that the
Prestige sends (it recognizes both formats when receiving). RIP-1 is universally supported;
but RIP-2 carries more information. RIP-1 is probably adequate for most networks, unless
you have an unusual network topology.
Both RIP-2B and RIP-2M sends the routing data in RIP-2 format; the difference being that
RIP-2B uses subnet broadcasting while RIP-2M uses multicasting.
Page view 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 285 286

Comments to this Manuals

No comments