ZyXEL VSG-1200 User Manual download pdf (Page 61)

VSG-1200 User’s Guide

Chapter 4 LAN, WAN and Server Setup 61

The following table describes the related fields in this screen.

4.8 Server Configuration

Use the Server Configuration screen to set the embedded web server, the LAN DHCP server

and specify the e-mail server for e-mail redirection on the VSG.

Click System Setting and Server to display the screen as shown next.

Table 9 System Setting: WAN/LAN: PPTP

FIELD DESCRIPTION

WAN Port Mode

PPTP Select this option to activate PPTP support. Refer to Section 4.7.5 “PPTP” on

page 60 for more information.

PPTP Local IP Address Enter the IP address assigned to you.

PPTP Local Subnet

Mask

Enter the subnet mask assigned to you.

PPTP Local Default

Gateway

Enter the IP address of the gateway device.

Username Enter the user name exactly as your ISP assigned. If assigned a name in the

form user@domain where domain identifies a service name, then enter both

components exactly as given.

Password Enter the password associated with the user name above.

PPP MTU Setting Enter the size of a Maximum Transmission Unit (MTU).

TCP MSS Setting Enter the size of the Maximum Segment Size (MSS).

Connections ID/Name Enter your identification name of the PPTP server assigned to you by the ISP.

Connect on Demand Select this option when you don’t want the connection up all the time and

specify an idle timeout in the Max Idle Time field (maximum 65535 minutes).

This is the default setting with an idle timeout of 10 minutes.

Keep Alive Select this option when you want the Internet connection up all the time and

specify a redial period in the Redial Period field (maximum 65535 seconds).

When disconnected, the VSG will attempt to bring up the connection after the

redial period.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 279 280

No comments

ZyXEL VSG-1200 User Manual Page 61