ZyXEL NWA3550 User Manual download pdf (Page 87)

Chapter 6 System Screens

NWA3550 User’s Guide

Figure 47 SYSTEM > Password.

The following table describes the labels in this screen.

Table 11 Password

LABEL DESCRIPTIONS

Enable Admin at Local Select this check box to have the device authenticate management logins to

the device.

Use old setting Select this to have the ZyXEL Device use the local management password

already configured on the device (“1234” is the default).

Use new setting Select this if you want to change the local management password.

Old Password Type in your existing system password (“1234” is the default password).

New Password Type your new system password (up to 31 characters). Note that as you type

a password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm Retype your new system password for confirmation.

Enable Admin on

RADIUS

Select this (and configure the other fields in this section) to have a RADIUS

server authenticate management logins to the ZyXEL Device.

Use old setting Select this to have a RADIUS server authenticate management logins to the

ZyXEL Device using the RADIUS username and password already configured

on the device.

Use new setting Select this if you want to change the RADIUS username and password the

ZyXEL Device uses to authenticate management logon.

User Name Enter the username for this user account. This name can be up to 31 ASCII

characters long, including spaces.

Password Type a password (up to 31 ASCII characters) for this user profile. Note that as

you type a password, the screen displays a (*) for each character you type.

Spaces are allowed.

Note: If you are using PEAP authentication, this password field

is limited to 14 ASCII characters in length.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 343 344

No comments

ZyXEL NWA3550 User Manual Page 87