ZyXEL NWA3550 User Manual Page 236

  • Download
  • Add to my manuals
  • Print
  • Page
    / 344
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 235
Chapter 19 Troubleshooting
NWA3550 User’s Guide
236
V The Internet connection is slow or intermittent.
1 There might be a lot of traffic on the network. If the ZyXEL Device is sending or
receiving a lot of information, try closing some programs that use the Internet, especially
peer-to-peer applications.
2 Make sure the ZyXEL Device is installed in a position free of obstructions.
3 Check the signal strength. If the signal is weak, try moving your computer closer to the
ZyXEL Device (if possible), and look around to see if there are any devices that might
be interfering with the wireless network (microwaves, other wireless networks, and so
on).
4 Reboot the ZyXEL Device.
5 If the problem continues, contact the network administrator or vendor, or try the
advanced suggestions.
Advanced Suggestions
Check the settings for QoS. If it is disabled, you might consider activating it. If it is
enabled, you might consider raising or lowering the priority for some applications.
19.4 Wireless Router/AP Troubleshooting
V I cannot access the ZyXEL Device or ping any computer from the WLAN.
1 Make sure the wireless LAN is enabled on the ZyXEL Device
2 Make sure the wireless adapter on the wireless client is working properly.
3 Make sure the wireless adapter (installed on your computer) is IEEE 802.11 compatible
and supports the same wireless standard as the ZyXEL Device.
4 Make sure your computer (with a wireless adapter installed) is within the transmission
range of the ZyXEL Device.
5 Check that both the ZyXEL Device and your wireless client are using the same wireless
and wireless security settings.
6 Make sure you allow the ZyXEL Device to be remotely accessed through the WLAN
interface. Check your remote management settings.
Page view 235
1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 343 344

Comments to this Manuals

No comments