ZyXEL NWA3550 User Manual download pdf (Page 54)

Chapter 4 Management Mode

NWA3550 User’s Guide

The following table describes the labels in this screen.

Table 2 The Management Mode Screen

LABEL DESCRIPTION

Standalone AP Select this to manage the ZyXEL Device using its own web configurator,

neither managing nor managed by other devices.

Managed AP Select this to have the ZyXEL Device managed by another ZyXEL Device

on your network.

When you do this, the ZyXEL Device can be configured ONLY by the

management AP.

If you do not have an AP controller on your network and want to return the

ZyXEL Device to standalone mode, you must use its physical RESET

button. All settings are returned to their default values.

Note: When you set the ZyXEL Device to Managed AP mode,

it becomes a DHCP client. To discover its new IP

address, check the DHCP server on your network. If

your network has no DHCP server, the ZyXEL Device’s

IP address remains the same. You can also check the

Controller > AP Lists screen of the AP controller on

your network.

Apply Click this to save your changes.

Note: If you change the mode in this screen, the ZyXEL

Device restarts. Wait a short while before you attempt

to log in again. If you changed the mode to Managed

AP, you cannot log in as the web configurator is

disabled; you must manage the ZyXEL Device through

the management AP on your network.

Reset Click this to return this screen to its previously-saved settings.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 343 344

No comments

ZyXEL NWA3550 User Manual Page 54