ZyXEL PLA-400 v2 User Manual download pdf (Page 77)

Appendix A Product Specifications

PLA-4xx Series User’s Guide

The following list, which is not exhaustive, illustrates the standards supported in the PLA-4xx.

Wall-mounting Instructions

Complete the following steps to hang your PLA-400/400 v2/401/401 v2/402 v2/470/470 v2

on a wall.

Frequency Band 1.8 MHz ~ 30 MHz

Certifications FCC, CE, CUL, UL, HomePlug AV, RoHS, C-Tick

Device Management Use the PLA-4xx Series Configuration Utility version 3.0.5(AG) to easily

configure the PLA-4xx.

Note: The PLA-4xx Series Configuration Utility version

3.0.5(AG) is only compatible with PLA-4xxs with the

latest firmware installed.

Network Name Change the powerline network name to only allow the powerline

adapters you specify to join your network.

Firmware Upgrade Download new firmware (when available) from the ZyXEL website and

use the configuration utility to install it.

Note: You do not need the configuration utility to install the

latest firmware. Follow the instructions in Section 5.4

on page 46 for installing the latest firmware.

Note: Only install firmware for your specific model!

Table 17 Performance

FEATURE DESCRIPTION

Throughput over PHYsical Transport

Medium (PHY)

Supports up to 200 Mbps in half duplex mode

Throughput over UDP Supports up to 150 Mbps over in-house power/coaxial

lines (LAN port limits to 100 Mbps)

Number of devices in one powerline

network

Supports up to 64 devices in 4 network groups

Table 18 Standards Supported

STANDARD DESCRIPTION

HomePlug AV Designed for transmitting audio/video on a home powerline network.

RFC 868 Time Protocol.

RFC 1112 IGMP v1

RFC 1157 SNMPv1: Simple Network Management Protocol version 1

RFC 1901 SNMP v2c Simple Network Management Protocol version 2c

RFC 2236 Internet Group Management Protocol, Version 2.

Table 16 Firmware Specifications

FEATURE DESCRIPTION

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 91 92

No comments

ZyXEL PLA-400 v2 User Manual Page 77