ZyXEL ZyAIR G-570S User Manual download pdf (Page 65)

ZyXEL G-570S User’s Guide

Chapter 6 Wireless Screens 65

The following table describes the labels in this screen.

Table 12 Wireless Settings: Wireless Client

LABEL DESCRIPTION

Operation Mode Select the operating mode from the drop-down list. The options are Access Point,

Wireless Client, Bridge and AP+Repeater.

SSID Wireless stations associating to the access point (AP) must have the same SSID.

Enter a descriptive name (up to 32 printable characters) for the wireless LAN.

Spaces are allowed.

Note: If you are configuring the device from a computer connected

to the wireless LAN and you change the device's SSID,

channel or security settings, you will lose your wireless

connection when you click Apply to save your settings. You

must then change the wireless settings of your computer to

match the device's new settings.

Wireless Mode Select 802.11b only to allow only IEEE 802.11b compliant WLAN devices to

associate with the device.

Select 802.11g only to allow only IEEE 802.11g compliant WLAN devices to

associate with the device.

Select Auto (11g/11b) to allow either IEEE 802.11b or IEEE 802.11g compliant

WLAN devices to associate with the device. The transmission rate of your device

might be reduced.

Advanced Settings

Radio Enable Turn on the wireless adapter to allow wireless communications between the device

and other IEEE 802.11b and IEEE 802.11g compliant wireless devices. Turn off

the wireless adapter to stop wireless communications between the device and

other IEEE 802.11b and IEEE 802.11g compliant wireless devices.

Output Power

Management

Set the output power of the device in this field. If there is a high density of APs

within an area, decrease the output power of the device to reduce interference with

other APs.

The options are Full, 50%, 25%, 12% and Min.

Data Rate

Management

Use this field to select a maximum data rate for the wireless connection(s). Please

note that this is a total rate to be shared by all of the device’s wireless connections.

Preamble Type Preamble is used to signal that data is coming to the receiver.

Short preamble increases performance as less time sending preamble means

more time for sending data. All IEEE 802.11b compliant wireless adapters support

long preamble, but not all support short preamble.

Select Long preamble if you are unsure what preamble mode the wireless

adapters support, and to provide more reliable communications in busy wireless

networks.

Select Short preamble if you are sure the wireless adapters support it, and to

provide more efficient communications.

Select Auto to have the device automatically use short preamble when all wireless

clients support it, otherwise the device uses long preamble.

Note: The device and the wireless stations MUST use the same

preamble mode in order to communicate.

Super-G Mode Super-G mode provides higher speed transmissions than regular IEEE 802.11g.

The other device must also support super-G mode in order for the device to use it

for the wireless connection. This is available when you select a Wireless Mode

that includes IEEE 802.11g.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 161 162

Comments to this Manuals

No comments

ZyXEL ZyAIR G-570S User Manual Page 65

Comments to this Manuals

Related products and manuals for WLAN access points ZyXEL ZyAIR G-570S