ZyXEL P-1100 User Manual download pdf (Page 86)

Prestige 1100 Internet Access Router

8-14 Filter Configuration

Figure 8-8 Menu 21.1.2 - Device Filter Rule

The following table describes the fields in the Device Filter Rule Menu.

Table 8-7 Device Filter Rule Menu Fields

Field Description Option

Filter # This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the second

filter set and the third filter rule of that set.

Filter Type Use the space bar to toggle between types of rules. Parameters displayed

below each type will be different.

[Device Filter

Rule] /

[TCP/IP Filter

Rule] / [IPX

Filter Rule]

Active Select [Yes] to turn on the filter rule. [Yes]/[No]

Offset Enter the starting byte of the data portion in the packet that you wish to

compare. The range for this field is from 0 to 255.

Default = 0

Length Enter the byte count of the data portion in the packet that you wish to

compare. The range for this field is 0 to 8.

Default = 0

Mask Enter the mask (in Hexadecimal) to apply to the data portion before

comparison.

Value Enter the value (in Hexadecimal) to compare with the data portion.

More If yes, a matching packet is passed to the next filter rule before an action is

taken; else the packet is disposed of according to the action fields.

If More is [Yes], then [Action Matched] and [Action Not Matched] will be

[N/A].

[Yes] / [ N/A]

Menu 21.1.1 - Device Filter Rule

Filter #: 1,1

Filter Type= Device Filter Rule

Active= No

Offset= 0

Length= 0

Mask= N/A

Value= N/A

More= No Log= None

Action Matched= Check Next Rule

Action Not Matched= Check Next Rule

Press ENTER to Confirm or ESC to Cancel:

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 129 130

No comments

ZyXEL P-1100 User Manual Page 86