ZyXEL P-1100 User Manual download pdf (Page 17)

Prestige 1100 Internet Access Router

Getting to know your Prestige 1-3

DHCP Support

DHCP (Dynamic Host Configuration Protocol) allows you to dynamically and automatically assign IP

address to hosts on your network.

Data Compression

Your Prestige incorporates Stac data compression to speed up data transfer. Stac is the de facto

standard of data compression over PPP links.

1.3 Front Panel LEDs and Back Panel Ports

Figure 1-2 Prestige 1100 Front Panel

1.3.1 Front Panel LEDs

The LED lights on the front panel indicate the operational status of your Prestige. Table 1-1 (next)

describes the LED functions:

Table 1-1 LED Functions

PWR The PWR (power) LED is on when power is applied to the Prestige.

SYS A steady on SYS (system) LED indicates the Prestige is on and functioning properly while an off SYS

LED indicates the system is not ready or a malfunction. The system is rebooting when the SYS LED is

blinking.

LAN-1_10M A steady green light indicates a 10Mbps Ethernet connection. The LED blinks when data is being sent

or received.

LAN-1_100M A steady orange light indicates a 100Mbps Ethernet Connection. The LED blinks when data is being

sent or received.

LAN-2_10M A steady green light indicates a 10Mbps Ethernet connection. The LED blinks when data is being sent

or received.

LAN-2_100M A steady orange light indicates a 100Mbps Ethernet Connection. The LED blinks when data is being

sent or received.

WAN The WAN LED is on when the Prestige is connected successfully to a WAN device. The LED blinks

when data is sent or received. The LED is off when the link is down.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 129 130

No comments

ZyXEL P-1100 User Manual Page 17